Posted by rd 2n in mo on January 08, 2015 at 13:58:06 from (76.214.59.22):
In Reply to: Pump house? posted by blunosr on January 08, 2015 at 11:49:04:
I've got a 4' x 5' concrete block well house that has the pressure tank and the pipes are exposed inside with a submersible pump. You want to keep the pipe going to the bldg below grade and put the pressure tank in the bldg if you are going to keep it warm otherwise you will be looking for 100w bulbs to keep the pipes warm in the winter like I am now. The house is 100' from the well and not able to move the pressure tank to the house. Insulate the walls with blue rigid insulation and insulate the roof deck. Put a hinge in the roof so you can open the roof for access and the driller will have something to rest the rig on when the pump has to be pulled in the future.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Measuring with Calipers - by Staff. The legs of inside calipers are curved outward at the extremities to facilitate measuring small holes, while outside caliper legs have a large curve inward to increase their capacity for large work. Firm-joint calipers are adjusted approximately by the hands and then set to the feel of the work by tapping them on a metal surface. It is a common practice when opening calipers by this means to tap the top of the joint. It is better, if possible, to tap the inside of the legs, as repeated blo
... [Read Article]
Latest Ad:
Late 50s early 60s international harvester 560 with cultivator
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
