Posted by da.bees on December 13, 2014 at 14:20:35 from (72.181.176.234):
I would like to buy my son and I a welder. Neither he nor I have welding experience so ease of learning is a factor. Budget is $500 max. I can buy a like new Lincoln PRO MIG 180 or a Lincoln 225 AC/DC TOMBSTONE for $500. Specs for mig are;
Input Power208/230/1/60 Rated Output208: 130A/17V/30% 230: 130A/20V/30% Input Current20A Output Range30-180A Solid Wire Size Range.025-.035 in. Cored Wire Size Range.030-.045 in. Wire Feed Speed Range50-500 ipm (1.3-12.7 m/min) Dimensions,14"H X 10.15"W X 18.6"D (H x W x D) Net Weight 66 Lbs Gas regulator included. No tank nor spool gun with it. They rate it up to 1/2" with flux core which is ample for our use but I don't know if that's single pass. I find most of what I hire welded and fabercated to be between 1/16th and 3/8ths. For steel,aside of tombstone'S capiable of much thicker and mig capiable of much thinner material is either welder remarkably better for begainers? How important do you find cleaner weld with gas shielding and capibility for aluminum (with optional spool gun)? Thanks in advance and hopfully I supplied enough info to alow meaningful opinions.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Sunday Drives - by Cowboy. Summer was finally upon us here in Northern Maine. We have two types of industry up here, one being "Forestry" (Wood Products) and the other "Farming" (Potatoes). There is no shortage of farm tractors and equipment around here! I have been restoring old Farm Tractors for the past 6 years, and have found it easier and less expensive to hit all the auctions and purchase whole tractors for parts needed. My wife who works at a local school, and only has weekends and summers off, while on t
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
