Re: Fuel filters for a 684 IH

Posted by jimb2 on December 12, 2014 at 13:38:16 from (99.241.118.87):

In Reply to: Fuel filters for a 684 IH posted by RossJones121 on December 12, 2014 at 11:33:55:

Hi Ross, did you change the filter O-rings?
If you did make sure you got all the old bits
of the O-ring out of the groove. Also do not
over tighten the filter bolt or you will crack
the glass bowl.

There is a bleed screw on top of each filter
housing.
Bleed filter closest to fuel tank first then
bleed the next filter. Put STOP/START/RUN lever
in the START position then try to start engine
after bleeding. If the engine will not start
then loosen an injector line at the rear of the
injector pump and try to start engine.
JimB

Replies:

Add a Reply! You must be Logged In to Post Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial No List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]