Posted by Texasmark1 on November 15, 2014 at 13:38:14 from (172.243.93.14):
In Reply to: Re: Math problems posted by JMOR on November 15, 2014 at 11:10:12:
I factored in 16# as that is 80% of the tank volume and around here that's as full as propane tanks of any kind get. It used to be 85 but I guess it's just another round of big brother protecting us from ourselves, like my 500 gal tank had to have a liquid level valve added this time (like the little ones up to 40# have to have, another money maker for them, plus yet another whole house inspection for another $65) before they would fill for the winter. Another $150 puked for service call and the valve plus the additional inspection. Not sure this isn't Amerigas takeover related. But that didn't account for the 40 gallons they vented to get the tank empty to open it up and install the valve....September, still warm. Nobody mentioned that. But I had to have the gas and Sept. is THE fill month as it is the cheapest for the year so I had to blow it off and tell them to get it done and get!
I guess I'am going to have to become congenial. I'm running out of propane dealers to "run off" the premises.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Timing Your Magneto Ignition Tractor - by Chris Pratt. If you have done major engine work or restored your tractor, chances are you removed the magneto and spark plug wires and eventually reached the point where you had to put it all back together and make it run. On our first cosmetic restoration, not having a manual, we carefully marked the wires, taped the magneto in the position it came off, and were careful not to turn the engine over while we had these components off. We thought we could get by with this since the engine ran perfectly and would not need any internal work. After the cleanup and painting was done, we began reassembly and finally came to t
... [Read Article]
Latest Ad:
1965 International Harvester McCormick Farmall cub tractor 2,500. Two owner tractor. My grandfather bought new in 1966, then we inherited it. Have all the paperwork original manual and all maintenance records. It starts and moves. Comes with underbelly mower, plough, and some other attachments.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
