Posted by fixerupper on November 14, 2014 at 19:07:12 from (100.42.82.100):
In Reply to: Cold ride home posted by David G on November 14, 2014 at 14:54:34:
Ill bet you'll be glad to get the heat houser on. It makes a big difference. Back in 71 when I was 20 we had a very late harvest with corn harvest starting for us on the opening day of pheasant season which was the second weekend of November at that time. The corn wasn't drying down and we were cribbing ear corn so we had to wait for the moisture to get down to where we could crib it without it molding.
Anyways, after the cribs were full we had a neighbor come in with his 45 Deere combine to get the rest of it. We didn't have a bin so being low man on the totem pole I had the job of hauling corn 6 miles one way to town with a Deere A and two wagons. On an average day I would make three trips, a good day saw four trips. This was getting around The first week in December here in northwest Iowa. I had no heat houser, just me sitting there facing the cold wind 12 hours a day. This went on for maybe ten days or so. Now you know why I'm not too wild about tractor rides!
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
