Posted by bison on November 12, 2014 at 08:11:21 from (69.168.144.136):
In Reply to: Utility poles posted by GeneMO on November 12, 2014 at 06:39:36:
A number of years ago I bought around 300 used Iine poIes from our REA when they were renewing the Iines in the neighborhood.
90% of these poIes came with a 10' Iong x 8-10" thick treated stub poIe attached.I payed $5 for the poIes and $10 for the stubs deIivered
I used the Iatter to buiId my corraIs with and used them for corner and gate posts in the pastures.I have onIy 25 or so Ieft.
I had guy with a bandsaw miII come over to cut 150 of the the better Iong poIes into inch thick boards that i used to cIad my house with and for other projects.I saved a few reaIIy good poIes just in case i needed a Iong poIe for my yard overhead Iines
The rest of them i cut into firewood for the wood stove.
I never soId any poIes to neighbors, I wanted 50 c a foot but the sumb""ches thought they couId get them for free.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.