Posted by KEH on October 27, 2014 at 16:26:04 from (67.231.175.190):
In Reply to: Re: I never knew posted by Southern Ray on October 27, 2014 at 12:45:29:
Very good imfo.
European homes from earliest times known had a fire in the center of the room. This practice was not limited to the poor. As soon as they figured a replacement, they built fireplaces and chimneys. When poor Europeans came to North America, they had no restrictions on building chimneys and fireplaces and did so ASAP. The reconstruction at Jamestown, VA, has wooden chimneys and fireplaces, coated generously with clay. Occasionally the fire got into the wood and burned the building down.
The American Indians used the fire in the middle of the room routine. This was a smokey system and there were cases of lung diseases. The most efficient structure for the fire in the middle routine was the Teepee on the great plains. It could be taken down quickly and the group could be on their way. (The women owned the village and decided when to move, usually when game animals got scarce and the latrines got to smelling.) The teepee was made of buffalo skins. There was a flap at the top with cords on it so that the flap could be moved to adjust the smoke flow. The bottom of the skins could be rolled up in hot weather, rolled down when cold, letting air in at the bottom.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Third Brush Generators - by Chris Pratt. While I love straightening sheet metal, cleaning, and painting old tractors, I use every excuse to avoid working on the on the electrics. I find the whole process sheer mystery. I have picked up and attempted to read every auto and farm electrics book with no improvement in the situation. They all seem to start with a chapter entitled "Theory of Electricity". After a few paragraphs I usually close the book and go back to banging out dents. A good friend and I were recently discussing our tractor electrical systems when he stated "I figure it all comes back to applying Ohms Law". At this point
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.