Re: Which sickle teeth do I have on Gleaner 300 style head?

Posted by JMS/.MN on October 15, 2014 at 16:17:14 from (209.237.125.241):

In Reply to: Which sickle teeth do I have on Gleaner 300 style head? posted by tractormiallis on October 15, 2014 at 15:31:20:

You need to ID just what you have....the 300 is a (1980s) series of flex heads, last two numbers designate width...315, 320, etc. Flex is not the older style floating cutterbar.

If it was a FCB it could be any of several add-on brands like Love, Hiniker, Hart-Carter, etc. Either style COULD have auto header height, but if yours doesn"t, I"m thinking it"s an older head with the add-on bar. The header should have an ID tag on the left side.

You need to ID the FCB mfgr. Look for casting numbers on the guards. Love is a yellow bar, H-C was black. Check the sections for rivet hole spacing...different brands used different widths, even though the section width is the same. Thus the knifeback is specific to brand as well.

Replies:

• Re: Which sickle teeth do I have on Gleaner 300 style head? Paul 05:57:36 10/16/14 (0)

Add a Reply! You must be Logged In to Post Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial No List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]