I have a 6 inch 30x40 slab, on clay, no sand, nothing underneath. Pole barn is the highest point on property. All the dirt around pole barn is angled away. No water stands, no heaving, no cracks. I hired a friend to put the floor in. He does it for a living. Old school guy who likes wire. The floor was done in one pour, no forms, he used nails in the the outside walls to level with. I put the nails there with rotating self leveling dewalt laser. The laser paid for itself on just that job. For every 1/4 inch I was off, it cost me $100, a yard, in concrete. So I got the ground perfect before the pour. Used laser when concrete poured for the finisher to get center level. The finisher did a great job.
I also have 1 ft vented eves to help keep the water away. Have vent-a-ridge and power vent too. Not the first hint of moisture problems, no heaving, no heat. I live In Terre Haute, In.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: What's The "Stuckest" You've Ever Been? - by Edited by Kim Pratt. Another great discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I was about 14 (part of the problem) when I got stuck. I was disking with a cab equipped IH 966. The window was dirty and I was driving into the evening sun. It was hard to see and it was my first pass down the field. I got the tractor so stuck that the underside of the tractor was resting on the ground. My uncle wanted
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
