Posted by kcmelancon on September 04, 2014 at 06:56:22 from (184.97.196.29):
Quoting Removed, click Modern View to see
Thanks to all for your thoughts and comments. Well, the lost flywheel is now found. After dozens of hours by many people probing with no success, my neighbor rented a metal detector and began sweeping the deep bull rushes. After several more hours with no success he threw in the towel and started walking back to his house. Of course the easiest way back was through the brush-hogged ditch, where he hadn't looked because it was "cut so short no flywheel could be hiding there". The metal detector went off, and to his surprise he found a Come-Along in the ditch that must have fallen from someone's trailer or vehicle as they passed by. After routing this out of the weeds the detector went off again and as he looked down could see the sheen of the flywheel edge under some weeds - EUREKA!
The bottom line is…. from the point of separation from the tractor, the flywheel came to rest in a wet soft roadway ditch about ~ 50 yd forward and about 10 yards to the left of the tractor's line of travel. The stand of weeds that the flywheel traversed would have to be characterized as extremely thick and heavy, and the ditch being "boggy", could also absorb significant flywheel energy. At any rate 50 yd is the distance it covered.
So, to those that said "look 1/4 mi away only to find it in your yard" or "get a metal detector, it should be easy to find", hats off to you, and hats off to all the others that offered a voice in the matter. Thank you.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Sunday Drives - by Cowboy. Summer was finally upon us here in Northern Maine. We have two types of industry up here, one being "Forestry" (Wood Products) and the other "Farming" (Potatoes). There is no shortage of farm tractors and equipment around here! I have been restoring old Farm Tractors for the past 6 years, and have found it easier and less expensive to hit all the auctions and purchase whole tractors for parts needed. My wife who works at a local school, and only has weekends and summers off, while on t
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
