JD 520 missing when it gets warmed up

Posted by Tom on August 03, 1998 at 06:13:27:

The last 2 times I have been bushhogging the tractor starts to miss after it gets good and warmed up (~30 minutes on a day thats 80 degrees F). It will be running fine then it will miss a few beats and make a loud pop when it does fire.At this time I limp it back to the garage, It will miss a few times even when the bushhog is not running. The fuel bulb is full and clean when it happens. The coil is the only old part in the ignition system. I pulled the plugs the look good. Is the coil a good place to start? Is it necessary to get a JD coil or would any coil made for a points and condensor 12v system work?
Thanks for the help
Tom Wyble in western NY

Follow Ups:

• Re: JD 520 missing when it gets warmed up MattT (OK) 10:17:37 8/04/98 (0)
• Re: JD 520 missing when it gets warmed up Dave Wickman Iowa 07:29:10 8/03/98 (3)
  • Re: Re: JD 520 missing when it gets warmed up Tom 09:48:59 8/03/98 (2)
    • Re: Re: Re: JD 520 missing when it gets warmed up Dave Wickman Iowa 10:32:28 8/03/98 (0)
    • Re: Re: Re: JD 520 missing when it gets warmed up Dave Wickman Iowa 10:22:44 8/03/98 (0)

Post a Followup