If I'm understanding the coding, we do it like this:
1st level: =!!= (two in-line with the tractor centerline, with "wings" to either side). 2nd level: !!!!! (five across in line with tractor c/l) 3d level: =!= (one in line with tractor c/l and "wings") 4th level: !!!! (4 across in line with tractor c/l) 5th level: ==
(Hmm, when looking at the "preview" of my message, it doesn't line up like I thought it would. But you get the idea)
We can usually get 100 or so bales on each wagon. These are on open flat wagons. The first level "wings" overhang our wagons by 6-8". It really depends how big your wagons are. We've done it this way for years and it seems to work good for us. The main thing will be get them in TIGHT together! Try to "lock" them in like LEGOs. Otherwise, every bump in the field with loosen the stack a little and eventually you'll hit that big bump that will make hay fall off! Also, however you stack, on an open wagon you need to "slant" your levels in slightly, like a pyramid, to help them from falling. Straight-sided levels with tend to fall.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Hydraulics - Cylinder Anatomy - by Curtis von Fange. Let�s make one more addition to our series on hydraulics. I�ve noticed a few questions in the comment section that could pertain to hydraulic cylinders so I thought we could take a short look at this real workhorse of the circuit. Cylinders are the reason for the hydraulic circuit. They take the fluid power delivered from the pump and magically change it into mechanical power. There are many types of cylinders that one might run across on a farm scenario. Each one could take a chapter in
... [Read Article]
Latest Ad:
Late 50s early 60s international harvester 560 with cultivator
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
