Posted by Zachary Hoyt on July 25, 2014 at 12:55:27 from (173.84.185.150):
I got a regulator/hose assembly and a couple of adapters to make it fit the stove, bought a 20# propane tank and hooked it up. Everything works except that one burner looks like it needs a new orifice. The LH oven pilot light tube had a hole in it, as I discovered, so I got a new piece of line and new ferrules at the hardware store and it seems to be working fine now. I tested the LH oven and the thermostat works, this will be the first time in 13 years that we have had an oven that will regulate its own temperature, which is quite a thrill. The thermostats are still available for this stove if we ever should have to replace them, though we only use one oven anyway. They are Robertshaw model FDs. The first photo is the old stove which we have been using for the past 13 years(it was here when we came) and the second is the new stove after moving it to the kitchen. I broke one of the corner mounts on my warehouse trolley so I am rather sad about that, if anyone has any insights on cast aluminum repair I posted pictures on the Tool Talk forum. Thank you all very much who helped me a couple of days ago with how to test the stove. Zach
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Fordson F Ignition System - by Anthony West. A fellow restorer contacted me earlier this year asking for some help and advice on a model F that he was restoring. He had over a period of months spent a fair amount of his hard earned cash on replacement parts for the old "trembler" ignition. Sadly though all his efforts seemed to be a waste of time and money as he still couldn''t get the temperamental old thing to run correctly!! If i said that this was a little frustrating for him that would be "conservative" in fact the problem had reduce
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
