Posted by FBH44 on July 19, 2014 at 02:39:17 from (64.85.215.30):
In Reply to: Electrical dither posted by wilson ind on July 18, 2014 at 15:16:20:
The basic techniqwue would be turn OFF all power. The black hot wire goes to the circuit breaker, which is then snapped into place. The white wire goes to the neutral bus. The bare ground goes to a ground bus,OR it can go to the same neutral bus, where it is all connected onto the same bus and the big bare No. 6 bare copper ground wire carries all the neutral current, and maybe the fault ground current down to the 8' driven ground rod. Make sure you use a GFCI - protected circuit breaker, it'll protect you. I run all my barn circuits, welder circuit, lights, grinders, drills, saws, etc. off GFCI protected corcuits. Works great.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - New Life for an Old Allis - by Tyler Woods. My friend Jon, has an old '39 Allis Chalmers B. He thought it a marginal tractor that had long since served its time. She smoked terribly and never had much power but he couldn't afford another so he was limping along with what he had. Jon's Allis has a small front loader and though it doesn't carry much, it serves his needs. It was the hard starting and low power that made him think it was time to replace the old girl. Jon called me to help him discover why his tractor wouldn't start
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
