Posted by Jim in Sask on June 27, 2014 at 20:07:19 from (198.254.183.243):
In Reply to: scrap metal prices posted by bison on June 27, 2014 at 15:15:19:
bison said: (quoted from post at 15:15:19 06/27/14) I took in a pickup load(3500 lb) heavy scrap iron to my local scrap yard today., all welding scrap and broke parts, no oversized pieces either,..had to unload it myself to boot
I got only $90 for the lot,it barely paid for the fuel for the trip
Rather dismal compared to new steel.
I feel i got robbed . :(
Their pricing
scrap steel $55/metric ton.(smaller than 5' long and 2'wide)
clean Aluminum 40 cent a lb
clean copper $1.20/lb
clean brass 1.25/lb
vehicles $30/ton
What are you guys getting?
You're not alone - I checked the price before seeding, $40/ton for old machinery, etc. This scrap yard is right next to a steel plant that melts it down. Sucks compared to what we see the Americans getting but if you want a clean place that's the deal.
This post was edited by Jim in Sask at 20:08:41 06/27/14.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Engine Valves - Some Helpful Information - by Staff. Intake - On the intake stroke the piston moves doward, sucking in carburized fuel through the open intake valve. Exhaust valve is closed. Compression - With both the intake and exhaust valves closed, the pistons upward stroke compresses or squeezes the fuel into the combustion chamber. Firing - Ignited by the spark, the compressed fuel explodes and forces the piston downward on its power stroke. Intake and exhaust valves are closed. Exhaust valves and seats are exp
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.