I think this is covered by others here, and I have zero experience with a drum mower but have used other mowers for decades.....
But, they would have some sort of linkage to lift, and float, as the three point goes up and down? Often a very small adjustment of this linkage makes a very big difference. Changing tractors means you have to change that adjustment? This float to carry the far end often has a spring involved, and some angle strut. Anything loose, sloppy, or mis adjusted will cause problems, only a few threads of a bolt can be a big difference.....
Your tractor needs the 3pt arms level, at least the right one will have a crank on it to level it with the left one - often the left side also has adjustments. Again a few cranks makes a very small actual adjustment, but can be a big swing of a difference to an implement 8 feet wide.
The manual for the mower probably covers this, we often don't have the manuals we should, and if we have them we forget to look at them....
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Piston Ring Removal and Replacement - by Chris Pratt. Piston Ring Removal and Replacement - Replacing rings is a fairly easy process to stretch the engines usability between major rebuilds and cut down on that blue smoke and high oil consumption. Frequently, replacing only the rings is not advisable because by the time you do the teardown and measurement of the components, the pistons are often beyond the manufacturers specification or something else you find will signify the need for a major rebu
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
