Posted by buickanddeere on June 02, 2014 at 09:25:46 from (184.151.36.38):
In Reply to: GL-1 140wt Gear Oil posted by M-MAN on June 02, 2014 at 08:32:00:
don"t know why anybody would bother with GL1 ?
Check the viscosity of Sae gear 90 or 140 to straight weight 50 and 60 motor oil. They are two different scales. 50wt motor oil on par with sae 90 gear.
http://www.bobistheoilguy.com/viscosity-charts/
Straight weight motor oil has high pressure wear additives that GL1 doesn"t. Motor oil is also yellow metal friendly.
Motor oil can be found with a friction material compatible rating. Typically a "Jaso" something rating with no friction modifiers.
This post was edited by buickanddeere at 17:35:03 06/02/14.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Maintaining Rubber Tires - by Staff. The broad use of rubber tires on farm tractors and machinery has resulted in a great saving in both time and operating costs since the time of steel wheels. There are, however, certain basic fundamentals in the care of tires that should be followed carefully if the owner is to derive maximum benefit from his or her investment. First and most important is to maintain proper pressure for the work at hand. Your best guide to proper inflation is the operator's manual or instruction book tha
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
