Posted by NCWayne on May 23, 2014 at 06:25:51 from (173.188.169.54):
In Reply to: OT Kibitzer Rant posted by John T on May 23, 2014 at 06:04:39:
Being mechanics, over the years both Dad and I have had folks like that standing around as we tried to work. In most cases the folks in question were the operator, or crew not able to work due to the machine being down, and they are usually pretty quite. As for some owners and other management types, it's often a different story.
Dad ran into one owner that kept telling him what was wrong, and what he needed to do to fix the problem. He finally started loading his tools back on the truck to the point the guy finally asked what he was doing. Dad's reply was that he seemed to know exactly what was wrong and what needed to be done to repair the problem so it appeared he wasn't needed....so he was going back to the shop. The guy finally got the hint and shut up and left.
For me it was a "Safety" idiot at one of the quarries. He kept questioning the things we did, and then demanded I 'tie off' when working on top of the machine. Thing is there was nothing over top of the machine to tie off to but open air, nothing on the machine had the required strength to tie off too, and the machine was not tall enough for a shock cord to function so you'd still have the shock of hitting something if you fell. Basically tying off was more hazardous than not. That being the case I stood and looked upwards for a second and said that since I didn't see a skyhook to tie off to safely, and that tying anywhere else would guarantee I swung into the machine and hit it if I fell, not to mention I'd be dealing with trying not to trip on the safety straps along with everything else it wasn't going to happen. I think my exact words, beyond the skyhook comment was basicslly that "I'll load my sh!t on the truck and carry my a$$ home before I do something that I know is going to get me hurt." Given that their crane was sitting there with the upper separated from the lower, the lower nearly gutted, and the upper not far behind, he took what I said to heart and Dad and I had no more problems with him the rest of the time we were there.
As far as the hose thing, one of my pet peeves is someone not taking the time to put tools back when they are done with them. Personally I can have half a dozen projects going on in the shop, and tools left at each project, and I know where they all are to get if needed. But if someone else borrows something it better go back where it came from, whether it was in the box or lying with one of my projects.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
