Posted by JDseller on May 20, 2014 at 22:29:49 from (208.126.198.123):
We have had a rough spring with the late winter. It jammed all the work into a very short time frame.
The corn is starting to spike real well. Some of it will be able to be rowed after today's heat. The later planted corn has a much better stand. It was too cold on the earlier planted corn. Some of it looks real tough.
I guess I am not totally correct on being all done planting. I kept about 50-60 acres to finish some water ways and get the contour strips back. This is on the one farm I rent next to me. I spoke of it in an earlier post. My family farmed/rented this farm for over fifty years. It is currently owned by three sisters. They actually split it into three parcels. Six years ago they rented it to a local BTO. He was offering them a sky high rent for then of $350/acre. Well he gutted the farm out in the five years he rented it. Tore out all the water ways. Removed all the contour strips. Plus little fertilizer the last few years he farmed it.
The sisters rented it back to me last year. I/my family has it under a LONG term contract. I built all new pasture fence last year. This year I have rebuilt over 5000 feet of water ways. Some of these had washed out over six feet deep. I used my brother's JD 750J crawler. It is one SWEET machine.
Plus I am laying out all the contours strips like they used to be. So by this time next year almost a third of the farm will be back to grass/alfalfa for hay.
The sisters are well pleased with how things are shaping up. They all have been out walking the place over. They really like all the new grass that is going to be there.
I am going to weight 400 LBS if they keep bring me out things they have cooked. LOL
I am also getting more done without a computer of my own. I would set at my old one and the next thing I knew there was an hour or two gone. So I am not sure I am going to buy another one right now. I have enough projects to finish to keep me busy for a long time.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Torque Wrenches - by Curtis Von Fange. When working with fasteners a torque wrench can play an important role in the correct assembly of critical equipment components. Lets examine in detail some of the reasons for using a torque wrench along with how to correctly use the variety of wrenches available. Applying the proper torque to a fastener accomplishes a number of tasks. First of all correct torque will hold the parts together. This may seem like a trite statement but � think about it for a second. Engineers have designed
... [Read Article]
Latest Ad:
WANTED IH C200 gas engine — complete running motor Wanted complete used IH C200 gas engine in running condition for an International 574 gas tractor. My block has a hole in it and is dead, so a rebuild kit wont do it — need a whole running motor. The C200 also came in the 544 and 674 gas trac
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
