Posted by D Slater on April 27, 2014 at 19:30:08 from (184.14.164.111):
In Reply to: M Farmall posted by dhano on April 27, 2014 at 15:19:32:
If that's the date code and the letter Z is correct. Look for a engine serial number above the cover on the right side of the block. Just above where the crankcase ventilation pipe mounts to the cover. Also down below the number 3 spark plug. It will be stamped in. Also if there is a serial number there, look above the oil filter for C-264 cast on the block. Then above the C-264 look for 6 numbers followed by R1. A few M cast date letters can end up looking like a Z. So if that's the case and its a M engine look for a serial number stamped in just above the right engine cover and below the first spark plug. Also below the 3rd or rear spark plug look for a cast number 6722 followed by 2 letters Like DE, DG, DJ, ETC. If the block has a serial number and a casting number the month and year the engine went into a tractor can be determined.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Identifying Your Tractor - by Staff. Maybe you bought it from a friend who didn't know what kind of tractor it was, or perhaps (and this is every tractor fanatics dream) you stumbled across it in an abandoned field covered with weeds but intact. In any case, you have no idea what the make and/or model is. For awhile perhaps it doesn't really matter. Especially if it runs! But pretty soon you'll probably need to tinker with it a bit and maybe buy a part or too. Having a manual is nice. But how does one go about dete
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
