Posted by Leroy on April 27, 2014 at 06:01:48 from (69.88.207.185):
In Reply to: Tractor Suggestions posted by fergienewbee on April 27, 2014 at 03:10:08:
I would say a MF 35 or newer a MF 135 as any 3 point equipment now will worke with them. You go to those newer Fords that are in the blue line your equipment may not work as the 4000 or 5000 have catagorie 2 hitches and you now have a cat 1 hitch. Not sure about the 2000 on that but then it may only have a 4 speed and pto as you now have. 3000 could be either way. For older Fords you would have to look at a 660 or 661 model to get something a bit bigger and I mean bit bigger 32-37 horse compaired to your 29 that is in the 30, possibly a 2000 or 4000 in grey 4 cylinder series. Even with the 35 or blue 3000 you would need a different front shaft on a bush hog style mower than needed on the 30.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers WD45 (Gas Version) - by Staff. Beginning production in 1953, the WD45 had the same general look as the WD tractor which was produced earlier - but was much more powerful. This was due to the new 4-cylinder "Power Crater" gasoline engine with a 4 x 4-1/2 inch bore and stroke. Some people feel this was one of the most significant tractors offered by Allis-Chalmers in those days. Nothing in its weight or power class could match its performance. In 1954 they began offering the WD45 with the new "Snap-Coupler&quo
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
