Posted by Mitch.1177 on April 23, 2014 at 05:15:12 from (70.198.7.111):
We have a 4630 powershift. We were planting yesterday, and about half of the times I tried to go from park to first gear, it would not engage. I tried using the clutch, and also not using the clutch. If it did not engage, I could feel the tractor jolt like it was trying to go. If I shifted to second when it was "slipping" it would give another jolt, but nothing. It did the same for shifts into 3rd and 4th while "slipping" I also tried using the clutch to start in 3rd and 4th, and got the same jolt with a slipping feel. What is strange is that if I used the clutch to start in 5th, it engaged every time, and then I could downshift to all lower gears perfectly. All gears shift and lock up great after it gets going. I never tried shifting from a slipping 4th to 5th. Like I said, this only happens about half of the time, and when it does engage, it shifts like a champ! Anybody have any thoughts or ideas? Any help would be appreciated!
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - My Ford Golden Jubilee - by Troy Estes. This article is about my '53 Ford Jubilee and a story that starts with taking the tractor to my brother's Starter/Alternator Rebuilding shop for a wiring fix. The generator was shot as well as all the wiring. I dropped off the tractor expecting a transformation from a 6 volt to a 12 volt system utilizing the original generator housing, and a total rewiring of the whole tractor. The front end center pin bushing was worn also so I ask that they replace it if they had time. Well, that’s wha
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
