Posted by buickanddeere on April 17, 2014 at 07:27:49 from (184.151.36.226):
In Reply to: Spark plug wires posted by DaninKansas on April 17, 2014 at 06:07:41:
Quoting Removed, click Modern View to see
As previously stated. Unless you are listening to AM radio on your tractor . Or running a ham radio rig. Use solid core wires from TSC . There are ready made spiral wound solid wires at Summit Racing.
Spark plugs should be Autote 3116 for 18mm applications. Auto 3076 or 3077 if 7/8 thread. 14mm threads need Autolite 216 or 437.
Non resistor wires and plugs are less prone to those partial failures. We have all seen the plug and wire that will throw a fat blue spark when tested. Spin the plug into the engine and nothing works.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
Looking for a minneapolis moline zts
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
