I've done them both ways, I like the felt style a lot better but thats just personal bias. If anything , it is even more impermeable than the cross weave.
I don't see why lime wouldnt work. Just more airborne fines to work in during construction. Most of our ag lime is 30 percent class I. Supposed to break down in 3 to 5 years. Your guess is good as mine on that. I've got it in my picnic area and it seems to melt down about by about 20 percent per year. Main thing is to make sure there is plenty, one rock in the spreader really smarts when it gets your ear where it joins your head.....
I stockpile..... we wont really discuss how long some times :). Manure spreading is a job that tends to get put off around here.... Sometimes for years..... sometimes decades...... I finally broke down and bought a decent spreader last year.... My old one would usually break down every 7 to 10 loads. Just now spread out the last of that pile on the 94 pad. It had only every been completely cleaned out once. I do flip a new pile once and stage it after about 6 months to let it cook on down. I like to let it get done heating all the way through before spreading. Seems to cut down on the weeds
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
