Posted by Goose on April 12, 2014 at 20:07:41 from (70.198.4.107):
Went to a farm auction today where they had a few firearms including an average looking M1. It brought $2950.
The last ones I saw on gun shows were going for $1200-$1500. Have they skyrocketed lately?
They had a table full of assorted ammo adjacent to it, and before it sold some bonehead who obviously knew nothing about M1's tried to put a clip of live ammo in it. Thankfully, he didn't succeed, but people were starting to back away. I don't think the idiot even realized if he'd have succeeded in seating the clip of ammo he'd have been standing in the middle of a crowd with a loaded rifle. Although the bolt probably would have gotten his thumb on the way shut.
All the firearms sold for twice what they should have, although I caught the auctioneer bumping bids. On a Colt .357 DA revolver, the bids went from $250 to $300 to $350 to $700, and sold for $850. What the heck?
It was a desirable piece, but you can buy them by the dozens for $400-$500.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Timing Your Magneto Ignition Tractor - by Chris Pratt. If you have done major engine work or restored your tractor, chances are you removed the magneto and spark plug wires and eventually reached the point where you had to put it all back together and make it run. On our first cosmetic restoration, not having a manual, we carefully marked the wires, taped the magneto in the position it came off, and were careful not to turn the engine over while we had these components off. We thought we could get by with this since the engine ran perfectly and would not need any internal work. After the cleanup and painting was done, we began reassembly and finally came to t
... [Read Article]
Latest Ad:
1965 International Harvester McCormick Farmall cub tractor 2,500. Two owner tractor. My grandfather bought new in 1966, then we inherited it. Have all the paperwork original manual and all maintenance records. It starts and moves. Comes with underbelly mower, plough, and some other attachments.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
