Posted by Richard Ivey on March 10, 2014 at 16:08:05 from (74.184.152.136):
I have purchased a 1977 IH 140 serial #61371J from the original owner. It came with a set of cultivators and plant shields that have never been used. It never had a main drive mounted on the bull gear or any type of implement mounted to a countershaft. The owner used it to cut grass and make the grand kids happy. I purchased the tractor to plant and work a large garden. I have acquired a main drive shaft and cog to connect to bull gear, chains, countershaft with a planter drive and a duplex planter marked peas on one side & corn on the other. The planter has shut off shields and seed plates with a lid and everything works. There is no seed drop tube. Please advise how this tractor should be set up to work a 1 to 3 acre vegetable garden. A manual for chain adjusting and operating would help tremendously. I don't want a pull behind planter, only a front mount. I plan on mounting a side dresser in front of the planter. All help is appreciated.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - What Oil Should I Use? - by Francis Robinson. I keep seein this question pop up over and over again in discussion groups all over the web. As with many things there are often several right answers and a few wrong ones. Some purist I'm sure will disagree to no end with what I will tell you but most of us out here in the real world don't really care do we ? Some of them only bring their noses down out of the air long enough to look down them anyway. If you are like me you are only doing this old tractor stuff because you enjoy it. You
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
