Posted by Russ from MN on February 27, 2014 at 08:06:49 from (68.235.89.3):
In Reply to: Cold weather start posted by Why Worry on February 27, 2014 at 07:08:16:
They make glue on oil pan heaters that work well, or you could put multiple magnetic ones on the engine, as most of them are very low wattage. Another trick that I have heard of is disconnect the air intake and hold a heat gun or hair dryer blowing into the engine. Our JD 4600 has an air intake preheater. I use that along with a immersion block heater and a magnetic heater on the oil pan and it starts immediately at -20F. As soon as it starts breathing cold air it will smoke a kittle but if you push in on the key (preheat) it will stop smoking.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: Removin Broken Bolts - by Staff. Another great discussion from the Tool Talk Discussion Forum. The discussion started out with the following post: " How would I remove a bolt thats broken off in a piece of metal and I want to save the treads in the metal and then put in a new bolt. "
... [Read Article]
Latest Ad:
Late 50s early 60s international harvester 560 with cultivator
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
