Posted by RodInNS on February 18, 2014 at 05:28:32 from (216.118.158.123):
In Reply to: Sawmill power posted by stihlsawer on February 17, 2014 at 18:27:44:
I think you would be well advised to go with more power than you're contemplating. A buddy of mine runs a 50 hp electric on an 42" saw and that is only driving the head saw, nothing else. It's pretty modest for power and I suspect some of the problems he has with it are from a lack of power. If you're running the rest of the mill off of a friction drive you could easily need 20-30 hp more... for a minimum. I'd look for something like a 100 hp tractor or at least a 4 cylinder turbo that you could turn up a bit to get the 100 intermittently. A MF 1105 would be a good candidate. IH 986 if you prefer that shade of red. I prefer Fords... an older 2wd 7710 could be tweaked to make the power you need. If you want to go older a Ford 8000 would be available pretty cheaply.... Personally I'd stay clear of the green leakers. Who wants to listen to that all day long.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Stories From Old Farmer - by K. Pratt. Old Farmer, a.k.a. Dale Jensen began posting messages to our discussion forums at the grand age of 75. With extensive knowledge of farming and tractors, he valued the past and the ways that went with it. He shared these values with us until shortly before his passing. I spoke with Dale in his last days and requested his permission to share some of his stories with the readers of our magazine. He agreed, and provided the
... [Read Article]
Latest Ad:
Looking for a minneapolis moline zts
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
