Re: 3-point lift arms would rather not drop

Posted by JimB2 on February 13, 2014 at 18:23:14 from (99.240.243.222):

In Reply to: 3-point lift arms would rather not drop posted by wolfman on February 13, 2014 at 17:50:02:

Hi Wolfman, I believe a 4210 is very similar to 684/695 tractor. See below for a couple suggestions from the archives if the IH tractor forum.

3 pt will not go down:

There is a cover on the right side,in front of the rock-shaft. Remove and check if the spool valve moves with the position lever. Make sure the draft control lever is down. It has a long spring, with a rod, maybe that spring is unhooked.

Hi, maybe the unload valve is stuck. Check with engine running, raise the hitch and pull at the same time the remote hydraulic lever. If the hitch raises, you have dirt in the unload valve. This valve is under the seat and you remove the large plug for access. One trick is loosen the large plug, unload valve, 2 turns and start the engine, the hitch should raise if the valve is stuck. It has a small hole in the valve. Just blow the dirt out with air. Replace with new O rings.
Original posts by Bernard le m�cano Qu�bec Canada

Hope this helps
JimB

Replies:

• Re: 3-point lift arms would rather not drop wolfman 18:12:58 02/14/14 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]