Posted by George Marsh on January 15, 2014 at 18:22:17 from (50.121.7.90):
I have a friend in the HVAC business. He has a small business. 3 years ago he sold an electric furnace to a guy at $500 over cost. Furnace worked fine for 2 years until the buyer added a second thermostat. The second thermostat was to turn just the furnace fan on so he heat from the wood boiler would come out of the ducts. Well the second thermostat turned the electric furnace on as well as the fan.
The buyer was mad at my friend for his furnace not working the way the he wanted it to work.
I rewired the second thermostat to make only the fan come on. When second thermostat gets to temp, second thermostat opens, fan shuts off. This guy installed an outside wood boiler and he put the hot water heating coil below the electric heating elements instead above the electric elements. That's a big mistake. When the boiler runs out of hot water, the house cools off, the electric heat comes on. The electric heat will heat the boiler water. The boiler's circulating pump never shuts off. So the electric heat will heat the boiler water and transfer the heat back to the boiler. CAN YOU SAY MISTAKE?
Now here is the insane part. The buyer claims he has about $14K in his wood boiler. Until I moved a wire around he was mad at my friend for selling him an electric furnace that didn't work the way he expected it to after he added a second thermostat.
My friend is happy I saved him from a lawsuit. Which my friend's only mistake was selling an electric furnace to this man.
The man also was complaining that when he lost power his electric generator failed him. I wanted nothing to do with that, so we left.
No way a generator can power up an electric furnace that has 4 heat strips that uses 20 amps each on 240v.
Perhaps now the generator will power up just the fan.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Day Mom Drove the 8N - by Brian Browning. My Dad was wanting to put in a garden but couldn't operate the 8N and handle the old horse drawn plow he had found and rigged up to use with the tractor. Well, he decided to go get Mom out of the house and have her drive the tractor while he walked behind the plow. You got to understand that while my Mom is a hard worker who will always help whenever she can... she had never operated farm machinery before that day. Dad got her out there, explained how the clutch was the same as in our o
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.