Posted by jollyrancher1975 on January 06, 2014 at 16:52:14 from (68.69.88.17):
my 3 point with a heavy 7 foot blade has some bobbing. it drops like a half a inch then raises, this happens rather quickly.When I shut the tractor off the 3 point slowly drops about 6 inches and stops. I looked inside fill plug with it running and saw no drips from the piston or anywhere else. I took the lift cover off and tore down the cylinder, the control valve looks fine, just some light wear on it no scuffing. my service manual points to the control valve. my problem is the cylinder has no paint on it so I don't know which one to order, yellow,blue or white. does anyone know what the difference in diameter between the colors? any other good way to trouble shoot a bobbing 3 point system, thanks for any help. rob
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Case VA Series - by Staff. V, VC, VI and VO). Althouh the Case VA looked much like the V, it shared no major components with its predecessor. Except for military units, the production of the Case VA was interrupted in July of 1942 due to World War II. It resumed again in 1944 and continued until 1953. It started up briefly later on in 1953 and continued on a very limited basis until 1956. The VA Series included the following models: VA: Fixed front wheel tread VAC:
... [Read Article]
Latest Ad:
Wanted to buy model 65 massey ferguson 65 diesel
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
