Posted by Bob Huntress on December 17, 2013 at 16:31:05 from (98.66.36.171):
In Reply to: mobile home axles.. posted by johnwayne360 on December 17, 2013 at 09:56:22:
"My only question is..can you fit different style brakes to the axles?"
Yes. If your Mobile Home axles had brakes that are no longer servicable they can be replaced with either surge or electric brakes. Some axles that did not have brakes before have the flange inboard of the spindle and brakes can be added. The key is that the axle have the bolt hole flanges welded behind the spindle. I suppose if the flange isn't there and you are experienced with fabrication, you could weld a set on one. If you are building this trailer do either of your axles have the flanges for brakes? If so, you might consider just making that the rear axle and installing brakes. You may have to shop around, though I was able to find a good set of electric brakes at TSC for my tandum axle trailer.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - A 1937 John Deere Unstuck - by Gary Hickman. Here is my story of how I got the pistons out of a 1937 JD B that the engine had been stuck for about 14 years: About 12 years ago my Dad gave me one of the tractors I ran as I was growing up on our farm in central Nebraska. The engine on this tractor, a 1937 John Deere "B", had been stuck for 2 years before he gave it to me. This last spring (1999) I hauled the tractor to our 2 acre lot in St. Libory Nebraska where it joined my antique machinery collection, at that time a 1929 Caterpillar T
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
