Posted by Ferd on December 17, 2013 at 09:05:18 from (50.39.110.100):
In Reply to: ot. need opinions posted by greg k on December 16, 2013 at 16:22:48:
If your work is faulty you can be forgiven, if your work is late you may be forgiven, but if you don't care you won't be forgiven. The problem still exists and you have now told them that you're "washing you hands of the problem". I'm a general contractor and in 1985 one of our customers called with a roof leak on a building we had just completed. Called the roofer and he sent me a bill for $75.00 noting it was a sheet metal problem - didn't fix it. I didn't pay the bill but the roofer called and said he would file a lien if I didn't pay. Sent him a check and told him to enjoy it as it would be the last dollar he would ever see from us. I would have used him for every building we've done over the last almost 30 years and an average of about 100,000 s.f. of roofs per year.
Once you agree to fix a problem, you've bought the problem. Best not to start something you either don't want to (or can't) finish.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.