Posted by ejensen on November 01, 2013 at 21:51:04 from (67.183.217.224):
In Reply to: Re: bolt sizes, length posted by Paul in MN on November 01, 2013 at 21:25:29:
Hi Paul I was able to buy 7 inch carriage bolts in grade 5 from Ballard Hardware here in seattle. Appreciate your thoughts on the stabilizer bars. Including a picture of the new stabilizer bars on my ford jubilee. Bought a selection of 5/8 grade 5 bolts to secure the front crankshaft pulley. I had the parts sent to my place on Orcas Island . A friend of mine checked the clearance for the adapter and told me that it went rignt in place. Will need to remove the 4 bolts that are in the pulley and attach the flex coupling for the pump driveshaft . Will probably need different lengh bolts. Again thanks for the information about using the loader. The only loader I have now is on my 1957 case 320 industrial . The backhoe provides plenty of weight to the back end on the tractor and it does have power steering.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.