Old, Is the 8N a heavier built tractor than the Jubilee? You have nice equipment on your 8N.I have a backhoe on an old 1957 case 320 I have. Made a 12 inch bucket for it using a junk yard 12 inch bucket which came off a bobcat. How much weight do you think I should use on the back of my jubilee to offset the loader? Contacted farm land tractor. They had a used pulley for a jubilee, the correct adapter, and a shaft to drive the pump. May have to have a machine shop do some work on what they send.
My friend took another look at my jubilee. There are 4 bolts which are on the front of the pulley. I think they probably secure the belt pulley.
The hand crank nut is still there. Do I replace it with a bolt as I would think the hand crank connector would interfere with the adapter. Seems that the bolt would have to have left hand threads. You mentioned that your 841 has a sherman transmision. I have a sherman in a 1948 TE20 ferguson I have. Makes good gearing.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Engine Valves - Some Helpful Information - by Staff. Intake - On the intake stroke the piston moves doward, sucking in carburized fuel through the open intake valve. Exhaust valve is closed. Compression - With both the intake and exhaust valves closed, the pistons upward stroke compresses or squeezes the fuel into the combustion chamber. Firing - Ignited by the spark, the compressed fuel explodes and forces the piston downward on its power stroke. Intake and exhaust valves are closed. Exhaust valves and seats are exp
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
