Do you like the charm of an old building? If you remodel it to be usable for machine storage the hay loft will have to be removed and the barn re-braced up higher. If you do it yourself and use the haymow sills for new bracing you probably won't have much money wrapped up in it. How are the foundation and roof? If the foundation is iffy I'd say tear it down. If the foundation is good but the roof needs new steel and you do it yourself you'll only have the cost of the steel, furring and trim, and a twelve pack for the friends who will be helping you hoist the steel sheets up there. If the siding is bad you can possibly find some used steel to side it with. The old nail holes won't bother much.
I've rebuilt every old building on my farm to some degree or other, including pulling together and straightening the old barn. I rebraced it with lumber from the old corn crib I tore down. I'm still half-way looking for used white roofing steel to side it with. Have I saved any money versus burning them down and building something new? Probably not much, but the farm still has the old building charm and besides, I get a kick out of fixing up old stuff. Jim
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.