I took an energy for agriculture class at good old Michigan State University, it had a section on alternative fuels, the university had just built a still for producing ethanol to experiment with for use in tractors and such, in the educational environment they gave tours of the still, folks would like to climb up the ladder to look in the mash tunn, folks running the show thought it would be nice to put a mirror above the tunn so folks of could see in without climbing. Instructor told us two valuable things during the tour, if you requisition a mirror to put on the ceiling from the university you get a lot of unwanted attention real quick and if you have to deal with the BATF (Bureau of Alcohol, Tobacco and Firearms)you'll find out real quick they're real butt holes. About 7 years later I was going through the US Navy's Explosive Ordinance Disposal School, one of the instructors- a Marine Master Gunnery Sergeant warned us that the BATF would be watching us and that they're real butt holes to deal with, avoid them at all costs.
So back to the post question if you distill you're very likely to end up dealing with the BATF and they're real butt holes. If you and I were to discuss (legal term "conspire") distilling alcohol and then one of us goes and purchases something for the purpose of distilling untaxed spirits we have both committed a felony. Probably don't want to mess with the BATF, this is the same organization that brought us such memorable events as the Davidian Complex stand off/massacre at Waco Texas and the Ruby Ridge shoot out.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Ferguson TO-20 - by Staff. When the infamous "Handshake Agreement" between Henry Ford and Harry Ferguson fell by the wayside (that's a story in itself), Harry Ferguson quickly set up manufacturing plants for a United States version of his English TE-20. The TO-20 was relatively the same as the TE-20 except utilized some different casting materials and had a US-style electrical system. The TO-20 was a dead ringer for the Ford 9N and 2N models and they say that Ferguson did this on purpose when the Handshake Agreement wen
... [Read Article]
Latest Ad:
1 SD Gibson, 1 D Model needs rear end assembled and installed, 1 D Model needs minor repairs, extra parts
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
