Posted by fastline on August 29, 2013 at 05:47:51 from (99.13.20.112):
I am working on a custom water well rig to be run on the back of the tractor. I am not yet sure if the hydro system can be run off the tractor system or not though.
I need to run a hydro motor for my rotary drill, and another hydro motor for the lift system. I am not sure what pressure the 1170 operates at but I had some thought to use the remotes to operate these two functions.
I also had an idea to tap the hydro line going to the remote block which should be constant pressure and add a quick coupler there and add a valve block on my drill rig. There is a 5th remote connection on the tractor which I believe to be a "case drain" for a hydro motor in which should work well for a return line. However, if I need reverse, this will all need more thought.
IIRC, a hydro motor has two pressure ports plus the case drain, just like a hydro pump? Reverse would not technically be needed but unscrewing drill stem would be sweet with that.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Sunday Drives - by Cowboy. Summer was finally upon us here in Northern Maine. We have two types of industry up here, one being "Forestry" (Wood Products) and the other "Farming" (Potatoes). There is no shortage of farm tractors and equipment around here! I have been restoring old Farm Tractors for the past 6 years, and have found it easier and less expensive to hit all the auctions and purchase whole tractors for parts needed. My wife who works at a local school, and only has weekends and summers off, while on t
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
