Posted by Bryce Frazier on August 26, 2013 at 15:18:36 from (67.142.168.143):
Hi guys it's Bryce. As many of you know, I am currently restoring a Case Centennial plow, however I have hit a road block. I sent one of my wheels to the sandblaster, and it cam back unusable. The TIRE size was a 5.50 x 16, I think that the rim needs to be a 4.50 x 16, but I am not sure. I am REALLY desperate for a rim as I am trying to get this plow finished for a plow day. This is the rim that has a traction tire on it, and goes on the Tripper side of the plow. The diameter of the hub hole is 4 3/8. From center of one lug hole, to the center of the opposite is 6 Inches. it is a 6 bolt rim. PLEASE let me know if any of you have a rim you would part with, or if you have any ideas on what I can do to fix the problem or if you know of any other brands that might fit. Please let me know what you think! Thanks, Bryce
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Third Brush Generators - by Chris Pratt. While I love straightening sheet metal, cleaning, and painting old tractors, I use every excuse to avoid working on the on the electrics. I find the whole process sheer mystery. I have picked up and attempted to read every auto and farm electrics book with no improvement in the situation. They all seem to start with a chapter entitled "Theory of Electricity". After a few paragraphs I usually close the book and go back to banging out dents. A good friend and I were recently discussing our tractor electrical systems when he stated "I figure it all comes back to applying Ohms Law". At this point
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.