Serial numbers are found to the left toward bottom showing the year. If your plate is unreadable, the major casting date markers will do it. They are raised cast in numbers and letters with a screw head between the groups. Check the archives for the meaning of the letter (year) info. A tractor built from mid 1951 through the early super H stage I will have a strong cam drive gear and the correct bolt pattern to allow a live hydraulic to be used from any stage II SH on through 350 tractors (IH or Farmall) no other Farmalls will have the right parts. The belly pump can be used as a 6 quart reservoir, or a separate reservoir adapted. The valve will need a pressure regulator built in to it set to 1200 to 1500 PSI. If your tractor is older, the only realistic solution is to use the cam gear and front cover off of a doner tractor as above. Acompleter setup from a Stage II super H would be easiest and have all needed components. Jim
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Buying your first tractor: The People You Buy From - by Chris Pratt. If you are a first-time buyer, chances are that you are likely to take the word of the seller on things. This is where the problems start... You have reviewed your implement needs and determined the size of machine that will fit the bill and even made a list of the most desirable models. You checked on the availability of a 3-point hitch for the machines on the list and advertised in your local classified paper with so
... [Read Article]
Latest Ad:
1 SD Gibson, 1 D Model needs rear end assembled and installed, 1 D Model needs minor repairs, extra parts
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
