If your Oliver Super 88 has dual hydraulics it could easily be the tillage and loader tractor for your current 7 acres and much more ground in the future. It may not have the creeper gears you want for bedding though. The guys on the Oliver forum can probably find your transmission speeds if you tell them your tractor's serial numbers. As-is, your S88 should have 50 to 60+ HP and weight 5000 lbs or more, add another 700 to 1000 lbs if it has fluid in the rear tires. It should comfortably handle a 3 bottom trailing plow, turning close to 1 1/2 acres per hour, and a 10 to 12 foot tandem finishing disk turning close to 5 acres per hour. Maybe go narrower on the disk in exchange for more speed to throw the dirt further for knocking down raised beds.
An aftermarket 3 point hitch (Saginaw brand? - no draft control) can be added for $600 to $1000 if needed. If you need more flotation and traction in a soft mellow seedbed, a set of rim mounted dual rear tires can be added for $100 to $300 (if you can find them).
A narrow front rowcrop tractor is pretty manuverable. Your disc brakes should be able to lock-up either rear tire for short pivoting turn arounds. No power steering will make the job harder, but a spinner knob on that big steering wheels will help a lot.
If your S88 does not have hydraulics it should be worth $1500 to $2500 as trade-in on a newer tractor that can do the bedding, tillage and loader jobs.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Silver King - by Staff. Silver King tractors were produced by the Fate-Root-Heath Company of Plymouth, Ohio. The company was founded by John Fate in 1884 and was originally called the "J.D. Fate Company". After several mergers over the years, the final company name of Fate-Root-Heath came about in 1919. The first tractor produced was actually called the "Plymouth" tractor and was powered by a 20 HP 4-cylinder engine with a 3x4" bore and stroke. The four speed transmission had a top speed of 25 mph! After more t
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
