I guess it depends on how much you want to spend for a LAWN MOWER! To me the zero turn models seem pretty high priced.
Over the years I have had 3 MTD made lawn tractors and overall, I have been satisfied with their service. I mow between 1 and 2 acres, but only half of that is ever watered.
My current unit is a Troy-Bilt 22 hp Kohler powered with a 46 inch mower deck and my first hydrostatic drive. I really like the hydrostatic drive feature and hope that will be durable in the long term. The mower works just fine.
On the other hand, THE GRASS CATCHER IS THE WORST PIECE OF CRAP I HAVE EVER TRIED TO USE!!! I believe the design is really poor: it plugs up VERY quickly if there is the slightest bit of moisture or if the grass I cut off is more than about 1/2 inch long. And after only 2 years, the thin plastic part that attaches to the mower deck is cracking and will need to be replaced.
My other lawn tractors used the old design of grass catcher, which is a bit larger and has a single piece grass tube. Those grass catchers worked much better. If there was heavy grass, or if the grass was really wet, they might plug up. But nothing like the new design, which might plug up in 20 or 30 feet. Unfortunately the old design of grass catcher will not fit the late deck, as the connecting piece is shaped very different. My old grass catchers were still in good, servicible shape after many years. The new one will need a connector part next year.
So my advice would be: if picking up the grass trimmings is a priority for you, you might want to look for something besides an MTD machine, since their new grass catcher DOES NOT WORK well. On the other hand my experience with the MTD machines has been OK, and they cost much less than the PREMIUM machines. Good luck!!!
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - On the Road with Dave Gohl: Auction Musings - by Dave Gohl. I was thinking the other day about all the auctions I've been to in the last few years. There've been many. Some have been very good, some have been well, disappointing to say the least. But no matter how good or bad auctions may be, we always seem to stay until the item we've come for or are interested in is on the block. I've been to some auctions near and far. I think the furthest has been the Two Cylinder 7 in the Amana Colonies last year. Lots of stuff, lots of people. I've also atten
... [Read Article]
Latest Ad:
Late 50s early 60s international harvester 560 with cultivator
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
