Re: Cut a few acres, it's raining

Posted by Don-Wi on June 22, 2013 at 21:49:37 from (75.249.85.105):

In Reply to: Cut a few acres, it's raining posted by Don-Wi on June 21, 2013 at 08:41:28:

I don't think so. It uses 2 ball bearings, one on each crank for either pitman. I replaced the top one last year, but couldn't get it apart to replace the bottom one, and was under the gun to get it together and drop some hay.

This year I gave it a few good pops from a 5' pry bar, and then it lifted right out from it's tapered socket. They also give you 2 holes to pound a punch through the crank to pound the bearing off the press fit shaft.

[URL=http://s209.photobucket.com/user/djn125/media/IMG_20130621_204015_zpsde3de653.jpg.html][/URL]

Donovan from Wisconsin

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]