Posted by Mike (WA) on June 20, 2013 at 07:44:24 from (69.10.199.42):
In Reply to: pto in tractor posted by ken midlam on June 20, 2013 at 07:05:38:
First off, is there a hole with a cover over it in the rear where the PTO would be? If its just smooth back there (not even a hole), you're going to have to get a whole rear housing off a PTO tractor. And with an industrial, you still may not be out of the woods- they often have very different transmissions than ag versions (forward-reverse shuttle, etc). As Janicholson said, try the Massey board. And if you have a Massey dealer nearby that you're friendly with, ask to study his parts manuals for the industrial and the corresponding ag model- they'll often tell you what parts are unique to each, and whether the conversion is feasible.
At the very least, you're going to have to come up with the PTO parts, gears, engagement lever, etc.- I'm wagering that you'd be better off buying what you want in the first place.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - A 1937 John Deere Unstuck - by Gary Hickman. Here is my story of how I got the pistons out of a 1937 JD B that the engine had been stuck for about 14 years: About 12 years ago my Dad gave me one of the tractors I ran as I was growing up on our farm in central Nebraska. The engine on this tractor, a 1937 John Deere "B", had been stuck for 2 years before he gave it to me. This last spring (1999) I hauled the tractor to our 2 acre lot in St. Libory Nebraska where it joined my antique machinery collection, at that time a 1929 Caterpillar T
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
