Posted by John A. on June 18, 2013 at 19:28:42 from (64.128.16.238):
In Reply to: Finally had enough posted by randallinMo on June 18, 2013 at 09:14:42:
ramdalinMo, I can tell from your post that this has gotten under your skin. Please talk it out face to face and at the Fence line. He may or may not be totally aware of the size and scope of this problem. Here where I live, when I started redoing fences 10 or so yrs ago, we were using a contractor and his D-7 Cat. We both agreed to doze a ROW that was wide enough, that if a tree at the edge of the ROW fell it wouldn't take out the fence. That has saves our fence many times over. Also allows you or him to be able to drive down, visibly check or shred their side of the ROW . Keep it Clean, Brush sprayed etc,etc. That will be beneficial to both of you, and temperaments. If 1/2of the ROW is not as wide as the Major Over Story Trees on either side then you will ALWAYS have this problem every time the wind changes directions, or Storms Big!!! At least if he does this and never goes back down that ROW you have cut Your Future Headaches by 97%. Hope this helps! Later, John A.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - History of the Cockshutt Tractor - by Danny Bowes (Dsl). The son of a very successful Toronto and Brantford, Ontario merchant, and himself quite an entreprenuer, James G. Cockshutt opened a business called the Brantford Plow Works in 1877. In 1882, the business was incorporated to become the Cockshutt Plow Company. Along with quality built equipment, expedious demand and expansion made Cockshutt Plow Works the leader in the tillage tools sector of the farm equipment industry by the 1920's.
... [Read Article]
Latest Ad:
Looking for a minneapolis moline zts
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
