Posted by Adirondack case guy on June 07, 2013 at 08:25:16 from (74.69.160.79):
Well, I've started storeing away the rest of next winters wood supply, that I cut last season. I had to light the fireplace again today to warm the house. Rain and 55F outside, this morning. The first pic was my 96' long wood pile last winter. I burned about 2/3rds of it. Started putting the last third into my cellar for next year. I converted an old electric feed cart into a wood cart. It rolls well on the blacktop driveway, and I use it in the cellar to move the wood from the pile to my home built dumbwaiter, which hoists the wood up to the side of our fireplace. I am putting the finishing touches on this new woodshed, which will hold 16 plus cord of wood when full. I have a small start on filling it, a bit over 1 cord. I installed a used Royall wood boiler in the garage last fall, which is tied into my centrsl hesting system, thus the reason for the woodshed being adjacent to the garage. 0 oil consumption, last two years. The woodshed was reverse engineered taking advantage of used steel that I had left over from my contraacting business. I retired last year. Bought $300 worth of dimentional lumber and cut the rear poles from the wood lot. It also extends rearward along the side of the garage for more tractor storage. I have 48 cents/sqft invested so far, 624 sqft. total. Hopefully, next week I will get up in the woods and start blocking and splitting the logs and poles I cut and skidded to landing throughout the 140 acer woods, last winter. We have always believed in managed woodlands, a practice that my dad taught me, and has served our family well, providing lumber, firewood and maple syrup for over a hundred years. Loren, the Acg.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Farmall M - by Staff. H so that mountable implements were interchaneable. The Farmall M was most popular with large-acreage row-crop farmers. It was powered by either a high-compression gas engine or a distillate version with lower compression. Options included the Lift-All hydraulic system, a belt pulley, PTO, rubber tires, starter, lights and a swinging drawbar. It could be ordered in the high-crop, wide-front or tricycle configurations. The high-crop version was called a Model MV.
... [Read Article]
Latest Ad:
1958 FORD RARE 4x4 801 TRACTOR, ELENCO/FRONT DRIVE, FRONTLOADER AND WEIGHTED REAR WHEELS, FIVE SPEED, LIVE PTO, GAS ENGINE, NEW REAR WHEELS AND TIRES, ENGINE RUNS.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
