Re: How to cut porcelain coated steel?

Posted by Janicholson on April 20, 2013 at 16:41:22 from (74.60.94.18):

In Reply to: How to cut porcelain coated steel? posted by TC in Tx on April 20, 2013 at 16:25:24:

You will be using only part of it, so experiment.
Start with a hole, and use each method you have. With the plasma torch it will need about 40 amps or so, and I would lead the cut (angle the tip behind the cut about 10 or 15 degrees) so any blowback doesn't slag the consumables. The extreme temp should cut it like butter. Jim

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]