I use a 50 gallon plastic trash barrel, and Arm & Hammer Washing soda from Walmart . I've cleaned old rusted wheels , vises , and the pan seat on my Farmall S.A.. Some tips : First ,use a charger that isn't automatic , that kind won't put out any current without sensing a battery . The neg. lead from the charger goes to the part you are cleaning Remove all grease first , it will act as an insulator and the rust can't react with the current. The process is line of site , so you will have to rotate your part once in a while. I use rebar for my electrodes , but any kind of steel will do. I welded 2 grids and placed them so the part hangs in the middle. The electrodes dissolve slowly , my 1/2 inch rebar lasted about 6 weeks cleaning 12 " wheels. It seems to help if you scrape the brown scum off the electrodes once in a while. Good luck !
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Sunday Drives - by Cowboy. Summer was finally upon us here in Northern Maine. We have two types of industry up here, one being "Forestry" (Wood Products) and the other "Farming" (Potatoes). There is no shortage of farm tractors and equipment around here! I have been restoring old Farm Tractors for the past 6 years, and have found it easier and less expensive to hit all the auctions and purchase whole tractors for parts needed. My wife who works at a local school, and only has weekends and summers off, while on t
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
