Re: jumper wire for 8n -with front distribeter

Posted by waltdavies on April 07, 2013 at 12:37:51 from (70.199.225.204):

In Reply to: jumper wire for 8n -with front distribeter posted by leanderwillie on April 07, 2013 at 12:19:26:

run a wire from the battery to the side of the coil + or - depending on how the battery is installed then the other side to the nut on the side of the distributor you will now be hot to start. make sure the wire to the battery uses a clip so that it can be quickly removed. this is a temporary setup to check if the engine will run, you will need to check for a wiring diagram for future work.
Walt

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]