Posted by George Marsh on March 27, 2013 at 04:38:53 from (50.104.195.160):
In Reply to: Refrigerant help posted by Fritz Maurer on March 26, 2013 at 19:01:21:
Fritz, If you look, there is a temperature scale on the suction guage, sometimes it on the box the freon bottle comes in. Pop coolers and refrigerators, you want the temperature to be above freezing. Some guages the temp is in celcius. zero celcius = 32 F.
I think the suction pressure should be around 5 psi for 134A.
If you add too much freon, you will see the suction line at the compressor will frost up.
So add the freon slowly, there will be condensation on the suction like before it turns to frost.
This is ture with everything I"ve worked on. Too much freon, liquid will come back, freeze up at the compressor, wash the oil out of the compressor, and you can guess what will happen next.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Product Review: JB Weld - by Staff. JB Weld is basically an epoxy glue that does an exceptionally good job of bonding to cast iron and steel along with several other materials. As I mentioned, it is so common that I have yet to buy a tractor that did not have JB Weld used somewhere. It is sometimes used so well you can't tell its there and other times used as a sloppy quick fix. Finding where and how it can be used correctly is key to whether you are using it as an "inelegant hack" or an integral solution to difficult and expens
... [Read Article]
Latest Ad:
1945 Farmall wide body gas with pto and front plow. Runs good but needs new points.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.